high brightness, exible, linear led alternative to conventional sources flexible printed circuit board has self adhesive backing for easy installation size of entire module (l x w x h) 9.19 ft x 0.4 in x 0.12 in. conveniently eld cut with scissors every 6 leds electrical connectors, mounting tracks and optical diffusers available for easy installation long life: up to 50,000 hours when temperature at tc point is maintained at 40? 120?beam angle optimal operation with opto- tronic 24vdc power supplies no uv or ir radiation rohs compliant the osram advance power topled delivers high luminous ?u x linearlight power flex led modules are suitable alternatives to conventional sources used in linear and curved architecture and display lighting applications. the module consists of high brightness, white leds uniformly spaced on a exible, self adhesive substrate. linearlight power flex modules have a service life of 50,000 hours with proper thermal management. the module is optimally paired with osram optotronic 24vdc power supplies. connector acces- sories are also available to simplify installation. to facilitate easy in- stallation, optional connector assemblies and mounting tracks are available in 18" and 56" lengths. these may be paired with diffuser accessories to modify and soften light distribution. led045r6 11/08 ordering description wattage (w) color lnrpwrflx/lm10p/w3f-727 9ft 72 2700k lnrpwrflx/lm10p/w3f-830 9ft 72 3000k lnrpwrflx/lm10p/w3f-835 9ft 72 3500k lnrpwrflx/lm10p/w3f-840 9ft 72 4000k lnrpwrflx/lm10p/w3-847 9ft* 72 4700k lnrpwrflx/lm10p/w3f-854 9ft 48 5400k lnrpwrflx/lm10p/w3-865 9ft* 72 6500k *available while supplies last. contact your osram sylvania respresentative for availability. applications cove lighting edge lighting transparent/diffuse materials border marking commercial signs emergency/rescue signs path and contour marking backlighting complex contours refrigeration cases display shelves recessed lighting application information linearlight power flex flexible high light output led modules www.sylvania.com key features & bene ts product offering
catalog # type project comments prepared by date lnrpwrflx / lm10p / w3f 7 27 linearlight power flex identification color code cri color temperature code white 7>70 27 = 2700k 47 = 4700k 3rd generation 8>80 30 = 3000k 54 = 5400k fine binning 35 = 3500k 65 = 6500k 40 = 4000k ordering guide minimum and maximum ratings parameter symbol values operating temperature at tc point t op -20... +85? (-4 to +185?) storage temperature t stg -20... +85? (-22 to +185?) voltage range v max 23...25 v dc maximum reverse voltage v r 25 v dc notes: 1. exceeding maximum ratings may damage the led module and cause potential safety hazards. 2. elevated operating temperatures can be expected to negatively impact the service life in terms of lumen output. speci cation data ordering information item ordering module no. of power voltage current per correlated color initial lumens number abbreviation length (ft) leds (w) (vdc) module (a) temperature (k)** per module (lm)* lumens/ft watts/ft 70268 lnrpwrflx/lm10p/w3f-727 9ft 9 120 72 24 3 2700k 1500 166 8 70331 lnrpwrflx/lm10p/w3f-830 9ft 9 120 72 24 3 3000k 1900 211 8 70325 lnrpwrflx/lm10p/w3f-835 9ft 9 120 72 24 3 3500k 2450 272 8 70328 lnrpwrflx/lm10p/w3f-840 9ft 9 120 72 24 3 4000k 2450 272 8 70137 lnrpwrflx/lm10p/w3-847 9ft*** 9 120 72 24 3 4700k 1900 211 8 70098 lnrpwrflx/lm10p/w3f-854 9ft 9 120 48 24 2 5400k 2100 233 5.3 70138 lnrpwrflx/lm10p/w3-865 9ft*** 9 120 72 24 3 6500k 1400 152 8 * all data is related to entire module measured at tc point of 25?. data re ects statistical mean values. actual data may differ depending on variances in the manufacturing process. end users need to take into account the lumen depreciation as the temperature rises with various thermal management solutions installed. **cri >70 for all 2700k and 3000k. all other white color temperatures have a cri >80. *** a vailable while supplies last. check with your osram sylvania representative for availability. power supply information optotronic 20w optotronic 50w optotronic 75w optotronic 96w optotronic 240w (51512) (51598) (51513, 51514) (51511, 51510) (51515) led item no. of max. no. of reels max. no. of reels max. no. of reels max. no. of reels max. number color coupons length (ft) (coupons) length (ft) (coupons) length (ft) (coupons) length (ft) (coupons) length (ft) 70268 727 (w3f) 5 2.3 0.65 (13) 6.1 1 (20) 9.2 1.3 (26) 11.9 1.1 (22) 10.1 70331 730 (w3f) 5 2.3 0.65 (13) 6.1 1 (20) 9.2 1.3 (26) 11.9 1.1 (22) 10.1 70325 835 (w3f) 5 2.3 0.65 (13) 6.1 1 (20) 9.2 1.3 (26) 11.9 1.1 (22) 10.1 70328 840 (w3f) 5 2.3 0.65 (13) 6.1 1 (20) 9.2 1.3 (26) 11.9 1.1 (22) 10.1 70137 847 (w3) 5 2.3 0.65 (13) 6.1 1 (20) 9.2 1.3 (26) 11.9 1.1 (22) 10.1 70098 854 (w3f) 8 3.6 1 (20) 9.2 1.6 (31) 14.2 2.0 (40) 18.3 1.7 (33) 15.1 70138 865 (w3) 5 2.3 0.65 (13) 6.1 1 (20) 9.2 1.3 (26) 11.9 1.1 (22) 10.1 a coupon is a sub-section of the linearlight powerflex module, containing 6 leds at a length of 5.5". the linearlight power flex modules can be dimmed when used with the ot dim or ot rgb3 dim. allow for an additional power consum ption of 3 watts for a 70 watt led load. these values are an approximation based on the typical "power" values listed under the "ordering information" parameters. to ac curately determine the maximum led load and its appropriate wiring, please evaluate the application based on the application note, "determining the maximum led load on a constant voltage power su pply", document #led026, and reference the wiring based on the wiring diagram. this document can be found at www.sylvania.com.
safety information warning: only qualified personnel should perform installation. to avoid electrical shock or component damage, disconnect power before attempting installation of the power supplies and/or modules. failure to install the power supplies and/or led modules in accordance with the national electric code (nec), all applicable fe deral, state and local electric codes as well as the specific underwriters laboratories (ul) safety standards for the installation, location and appli cation may cause serious personal injury, death, property damage and/or product malfunction. these instructions are guidelines for installation of sylvania led modules and power supplies. installation requirements may va ry depending on the application. licensed electricians should provide all installation services for connection of both primary and secondary (input/output) of the power supplies. 1. the led itself and all its components must not be mechanically stressed. 2. assembly must not damage or destroy conducting paths on the circuit board. 3. observe correct electrical polarity! for all w3/w3f types of this product wrong polarity will lead to an emission of red li ght. warning: reverse polarity can destroy these modules. immediately shut off power and correct polarity! 4. please ensure that the power supply is of adequate power rating to operate the total load. follow appropriate nec requireme nts. 5. when mounting on metallic or otherwise conductive surfaces, an electrical isolation is required at soldering points between the module and the mounting surface. 6. the entire linearlight power flex module can be operated with a power feed at one end of the module. 7. pay attention to standard electrostatic discharge (esd) precautions when installing the module. 8. the module, as manufactured, has no conformal coating and therefore offers no inherent protection against corrosion. the a bility to customize the length of the module by cutting at specifically marked points is a key feature of the product and hence the reason for no factory installed c onformal coating. for these reasons, it is recommended that the user complete all module modifications first (cutting, wiring) and then apply a conformal coating in the final stages of installation. 9. damage by corrosion will not be honored as a materials defect claim. it is the user s responsibility to provide suitable pr otection against corrosive agents such as moisture and condensation and other harmful elements. 10. for applications involving exposure to humidity and dust, the module must be protected by a fixture, or housing with a sui table protection class. the module can be protected against condensation water by treatment with an appropriate circuit grade conformal coating. the conformal coating sh ould have the following features: ? optical transparency ? uv-resistance ? thermal expansion matching the thermal expansion of the module 15-30*^-6cm/cm/k ? low permeability of steam for all climatic conditions ? resistance against corrosive environment the lacquer apl of the company electrolube http://www.electrolube.com has met the conditions for linearlight flex in our tests. the led module incorporates no protection against short circuits, overload or overheating. therefore it is necessary to operate the modules with an electronically stabilized power supply offering protection against the above mentioned safety risks. osram optotronic power supplies are specifically designed with protection features for safe operation. when using power supplies other than optotronic the following basic safety features should be verified in addition to any other application specific concerns and local safety codes: ?short circuit protection ?overload protection ?overheat protection ?correct output voltage, including consideration for ripple and spikes assembly information 1. solder connections should only be performed on designated solder pads (marked ?4v +/-?. during soldering, do not exceed the maximum soldering time of 10 seconds and the maximum soldering temperature of 260?. 2. the smallest electrical unit (seu) or "coupon" can be removed by cutting with scissors between the designated solder pads ( reference "assembly diagram" for location). item ordering length width wire number abbreviaion description (in.) (in.) length (in.) lens 70269 lm2pinflexconn input connector 20.21 0.64 19.69 70263 lm2conn5flexconnbb board to board (short) 1.43 0.64 0.39 70131 linearlight flexconnbb board to board (long) 6 0.64 0.39 71236 linearlight track 1.5p mounting track 18 1.4 ? prismatic 71237 linearlight track 4.7p mounting track 56 1.4 ? prismatic 71238 linearlight track 1.5d mounting track 18 1.4 ? diffuse 71239 linearlight track 4.7d mounting track 56 1.4 ? diffuse accessories note: for flex connector installation instructions reference "flex connectors user's guide" led069 found at wwww.sylvania.com.
osram sylvania national customer service and sales center 18725 n. union street west eld, in 46074 usa industrial commercial phone: 1-800-255-5042 fax: 1-800-255-5043 national accounts phone: 1-800-562-4671 fax: 1-800-562-4674 oem/special markets phone: 1-800-762-7191 fax: 1-800-762-7192 display/optic phone: 1-888-677-2627 fax: 1-800-762-7192 in canada osram sylvania ltd headquarters 2001 drew road mississauga, on l5s 1s4 industrial commercial phone: 1-800-263-2852 fax: 1-800-667-6772 special markets phone: 1-800-265-2852 fax: 1-800-667-6772 visit our website: www.sylvania.com ?2008 osram sylvania 11/08 photography wiring diagram assembly diagram ?determining the maximum load on a constant voltage power supply.? as noted previously, to accurately determine maximum led load the derating values listed in the app. note # led026 must be factored in. reference the "maximum product load" circuit requirement charts for the maximum product load per power supply. because of the power consumed by these controllers, an additional de-rating of the overall "maximum" load must be factored into the above chart. to determine this de-rating (wattage) value, please reference step 8 of the same application note #led026. 3. the mounting of the module is facilitated by means of the double-sided adhesive on the back-surface of the module. care must be taken to provide a clean and dry mounting surface, free of oils or silicone coatings as well as dirt par- ticles. the mounting substrate must have sufficient structural integrity. take care to completely remove the adhesive backing. once the module is appropriately positioned, press on the module with about 20n/cm 2 (refer to application techniques of 3m adhesive transfer tapes). 4. the minimum bending radius is 2 cm. the module may be bent over a smaller radius but only in regions of the circuit board containing no electronic components. such bends should be made only once and fixed in position to avoid cyclic fatigue. 5. the thermal expansion coefficient along the length of the module is 17 x 10 -6 cm/cm/k. when installing in environments with large variations in temperature (e.g. outdoor applications) and operating length of more than 2m, the use of metallic mount- ing surfaces is necessary. otherwise it is advisable to use an additional thicker adhesive tape to absorb the stress of any mismatch in expansion coefficients. 6. installation of the linearlight power flex must include provisions for thermal management to avoid premature failure of the product and to obtain expected service life. service life (i.e. lumen depreciation) is primarily a function of led tempera - ture, which is to be monitored on the circuit board at the designated ?c point? (a tc point temperature of 40? should be sufficient to enable a service life of 50,000 hrs.) 7. concerning fixture design, it is important to understand that once heat is transferred to a ?eat sink? that heat must sti ll be allowed to escape the ?ystem? a heat sink transferring the thermal energy to the inside of an enclosed cavity may ulti- mately be of little use. 8. the fixture makers?strategy should be to design a prototype fixture and test that fixture in an appropriate environment wh ile monitoring the temperature at the tc point, which should be allowed enough time to reach thermal equilibrium. tc point temperature can be measured with a standard thermocouple in direct contact with the circuit board at the tc point or by use of ml4c series non-reversible omegalabels (www.omega.com) or equivalent. assembly information (continued) osram and optotronic are registered trademarks of osram gmbh. sylvania is a registered trademark of osram sylvania inc. speci cations subject to change without notice.
|
